The receiver for BRICK and PAIL encased in a watertight box for mounting outside the machine’s electric panel.

The same model receiver can be used for all transmitters.

REMdevice radiocomandi radio remote control
The RxDIN-CL is a modular receiver housed in a watertight box together with an integrated antenna for mounting on the outside of the electric panel.

Installation is possible on machines with cable consol or for external radio control.

It is easy to install and comes supplied with fixing plates adapted for both horizontal or vertical use.

The receiver is made with the latest technology and with a strengthened frame that makes it resistant to electrical and mechanical disturbances (like vibrations).

The new radio module versions are made from components that guarantee stability of the radio frequency equal to 2 ppm (parts per million).

In this way, the remote controls can be used in temperatures ranging from -20°C to +70°C (-4°F to +158°F) without needing to be calibrated.

REMdevice radiocomandi radio remote control
REMdevice radiocomandi radio remote control

The monitor tester instantly measures radio signal strength and disturbance levels in the working area of the remote control. It can also be used to see the channel and frequency on which the transmitter is programmed. It also provides the remote control’s settings and an accurate diagnostic readout.

REMdevice radiocomandi radio remote control

  • Frequency: 869.700 - 870.000 MHz, 11 channels, 25 KHz
  • Frequency: 433.050 - 434.790 MHz, 59 channels, 25 KHz
  • Hamming Code > 4
  • Max no. of simultaneous on/off commands: 10 / 12
  • Command response time: 45 ms
  • Stop/Active emergency response time: 45 ms
  • Passive emergency response time: 1 s
  • Performance Level of safety function according to EN ISO 13849-1:2006
    • Stop protection: Category 3 PL d
    • Protection against unintended movements from the standstill position: Category 2 PL c
  • Range of control: approx. 100 m (~330 ft)
  • Working and storage temperature: -20°C to +70°C (-4°F to +158°F)


  • Radio frequency Receiver: Single Chip
  • Antenna: ¼ λ amplified or directional
  • Power of command relay contacts: 4A (DC1/AC1)* / 115V
  • Power of stop relay contacts: 4A (DC1/AC1)* / 115V
    * connecting a diode in parallel with the load, the same current is allowed for category DC13 (inductive load).
    To comply with category AC15 is recommended to place in parallel connection with the load an appropriate overvoltage damping RC circuit. (Ref. IEC/EN60947)
  • Power supply: 10-30 Vdc / 24-48 V / 48-110 V
  • RubyBox casing for external fixing:
    • Degree of protection: IP65
    • Material: PA6 GF V0
    • Dimensions: 166 × 279 × 91 mm (L×W×H) 6.53 × 10.98 × 3.58 in


The RxDIN-CL receiver can be used with:


REMdevice radiocomandi radio remote control
REMdevice radiocomandi radio remote control
REMdevice radiocomandi radio remote control